 |
| 1.测评任务 测试M2354的硬件RTC，开启RTC功能，运用a href="https://bbs.elecfans.com/zhuti_emb_1.html" target="_blank">RT-Thread提供的bsp及库函数，实现一个RTC功能。 实现功能：初始化RTC时间，通过控制台每秒打印一次时间。 2.测评硬件 本次使用的硬件是Nuvoton官方的NuMaker-M2354开发板 mcu型号：M2354KJFAE 内核：cortex-M23 3.环境搭建及工程创建 在bsp->nuvoton->numaker-m2354 下应用env工具进行配置  配置完成后，保存退出使用命令 scons --target=mdk5 生成 keil 工程，打开工程编译下载。 4.下载运行 插入sd卡，复位后，控制台打印如下： | / RT - Thread Operating System / | 4.0.4 build Dec 19 2021 23:03:10 2006 - 2021 Copyright by rt-thread team [I/I2C] I2C bus [i2c1] registered [I/slcd] Working frame rate is 64Hz on Type-A. [I/sal.skt] Socket Abstraction Layer initialize success. [I/utest] utest is initialize success. [I/utest] total utest testcase num: (0) [I/at.clnt] AT client(V1.3.1) on device uart4 initialize success. [D/FAL] (fal_flash_init:63) Flash device | OnChip_APROM | addr: 0x00000000 | len: 0x00100000 | blk_size: 0x00000800 |initialized finish. [D/FAL] (fal_flash_init:63) Flash device | OnChip_LDROM | addr: 0x00100000 | len: 0x00104000 | blk_size: 0x00000800 |initialized finish. [I/FAL] ==================== FAL partition table ==================== [I/FAL] | name | flash_dev | offset | length | [I/FAL] ------------------------------------------------------------- [I/FAL] | ldrom | OnChip_LDROM | 0x00000000 | 0x00001000 | [I/FAL] | aprom | OnChip_APROM | 0x000f0000 | 0x00010000 | [I/FAL] ============================================================= [I/FAL] RT-Thread Flash Abstraction Layer (V0.5.0) initialize success. [I/dancemouse] Ready. msh />Failed to mount sdh0 on / [I/at.dev.esp] esp0 device wifi is disconnect. [E/at.clnt] execute command (AT+CWJAP="NT_ZY_BUFFALO","12345678") failed! [W/at.dev.esp] esp0 device wifi connect failed, check ssid(NT_ZY_BUFFALO) and password(12345678). [I/at.dev.esp] esp0 device network initialize successfully. 5.实验现象 microSD挂载失败，不知所以然，试了好多配置，留着之后再做研究，另外使用nuvoton的bsp里的例程，可以正确读取扇区，说明硬件没有问题的，另外看了论坛上有一个相同microSD任务的配置了就可以。看他git的工程没有上传成功。很诧异。 |
Powered by Discuz! X3.4
© 2001-2023 Discuz! Team.
